§ 63.1569. What are my requirements for HAP emissions from bypass lines?
366 words·~2 min read·
/us/cfr/t40/s§ 63.1569·A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
(a)What work practice standards must I meet?
(1)You must meet each work practice standard in Table 36 of this subpart that applies to you. You can choose from the four options in paragraphs (a)(1)(i) through
(iv)of this section:
(i)You can elect to install an automated system (Option 1);
(ii)You can elect to use a manual lock system (Option 2);
(iii)You can elect to seal the line (Option 3); or
(iv)You can elect to vent to a control device (Option 4).
(2)As provided in § 63.6(g), we, the EPA, may choose to grant you permission to use an alternative to the work practice standard in paragraph (a)(1) of this section.
(3)You must prepare an operation, maintenance, and monitoring plan according to the requirements in § 63.1574(f) and operate at all times according to the procedures in the plan.
(b)How do I demonstrate initial compliance with the work practice standards? You must:
(1)If you elect the option in paragraph (a)(1)(i) of this section, conduct each performance test for a bypass line according to the requirements in § 63.1571 and under the conditions specified in Table 37 of this subpart.
(2)Demonstrate initial compliance with each work practice standard in Table 36 of this subpart that applies to you according to Table 38 of this subpart.
(3)Demonstrate initial compliance with the work practice standard in paragraph (a)(3) of this section by submitting the operation, maintenance, and monitoring plan to your permitting authority as part of your notification of compliance status.
(4)Submit the notification of compliance status containing the results of the initial compliance demonstration according to the requirements in § 63.1574.
(c)How do I demonstrate continuous compliance with the work practice standards? You must:
(1)Demonstrate continuous compliance with each work practice standard in Table 36 of this subpart that applies to you according to the requirements in Table 39 of this subpart.
(2)Demonstrate continuous compliance with the work practice standard in paragraph (a)(3) of this section by complying with the procedures in your operation, maintenance, and monitoring plan. [67 FR 17773, Apr. 11, 2002, as amended at 83 FR 60723, Nov. 26, 2018]